TCL 100 POWERFUL CLEANER FOR TILES – JOINTS – GRANITES – NATURAL AND ARTIFICIAL STONE

Description

Description

Very strong and concentrated cleaner, suitable for ceramic tiles – cotto – tiles from natural and artificial granite, tile joints, decorative stones, etc. Its efficiency in cleaning cement – plaster – grout residues from various tasks, make it an essential tool for every user. Cleans dirt caused by the wear of time, suitable for stains from coffee – oils – rust – stains from watering pots, etc.

Uses

It is suitable for

• All types of absorbent and non-absorbent ceramic tiles, such as cotto, terracotta, ceramic glazed tiles, concrete paving slabs, garden tiles, etc. cementitious tile and marble joints (restoring the original color of grout)
• All types of natural stones, such as Pelion, Karystos slabs, building stones, pebbles, natural cobblestones, decorative cladding stones, etc.
• Most types of artificial stones
• Horizontal and vertical surfaces such as terraces, courtyards, garden corridors, sidewalks, window sills, masonry lined with stone.

In combination with waterproofing liquid, it offers long-term protection.

Note: Due to the different nature of each material, a suitability test on a small area of ​​the surface prior to application is recommended. The intense colors of grouts should be paid special attention because during cleaning their pigments are affected resulting in their scraping.

Not suitable for limestone rocks.

Advantages

• Immediate and effective
• Suitable for multiple applications
• Revitalizes the appearance of surfaces
• It does not alter the appearance of the absorbent tiles
• Indoor and outdoor use – Ease of application

Method of Application

• The TCL 100 is very strong and the use of protective gloves and goggles is recommended as a precaution.
• To avoid the possibility of corrosion, a test application on a small part of the surface to be cleaned is recommended.
• Remove or cover sensitive surfaces and objects.
• Apply insoluble TCL 100 to the surface by rubbing with a broom or hard sponge for 3-5 minutes.
• Before the material dries, rinse the surface with clean water, rubbing at the same time with a broom.
• If there are stains that persist, you can repeat the procedure after 15 – 20 minutes.
• For cleaning simple stains can be diluted 20% with water.
• Not recommended for polished marbles.
• Application temperature: +5 ° C to + 35 ° C

Standards

Form: clear liquid.

Odor: Acidic.

Specific gravity: 1 g / ml, 25 ° C.

It is not flammable.

Means of disposal

In plastic containers 1 lt and 4 lt.

Save

Containers are stored in a dry place at a temperature of + 5 ° C to + 35 ° C, protected from sunlight and stored for at least 24 months from the date of production.

Consumption

You need about 1 lt per 5 to 6 m².